型號 HP113.01
波登管壓力表發展空間，銅合金，不銹鋼外殼有所應，表圓50足了準備，63，80和100
Model HP113.01
Bourdon tube pressure gauge, copper alloy, stainless steel case, gauge circles 50, 63, 80 and 100
耐振壓力表的應用
適合存在脈沖或振動的嚴酷工作條件
適用于不會堵塞壓力系統或腐蝕銅合金部件的所有氣體和液體介質
液壓裝置
壓縮機和船舶制造
Application of Vibration Resistant Pressure Gauge
Suitable for harsh operating conditions with pulses or vibrations
Suitable for all gaseous and liquid media that will not clog pressure systems or corrode copper alloy components
Hydraulics
Compressor and shipbuilding
耐振壓力表的功能特性
抗振動著力提升，抗沖擊
外殼堅固
量程范圍：0 ... 60 MPa
Functional Characteristics of Vibration Resistant Pressure Gauge
Anti-vibration, anti-shock
Rugged housing
Measuring range: 0 ... 60 MPa
耐振壓力表的描述
HP113.01型充液波登管壓力外殼采用不銹鋼制成深刻內涵，接液部分由銅合金制成。
HP113.01充液壓力表符合國際行業標準EN 837-1, ASME B40.1 & GB 1226-2017對波登管壓力表的要求融合。
由于表內有液體填充深入闡釋，壓力元件和運動被有效地緩沖。因此完成的事情，這些儀表特別適用于高動態負載點的測量物聯與互聯，如頻繁的壓力波動或振動。
HP113.01充液壓力表表殼標準尺寸有50改造層面、63供給、80和100毫米優勢與挑戰，并符合IP65防護等級。該壓力表的準確度可達到1.0級解決方案，可廣泛應用于工業中趨勢。
安裝在控制面板時，軸向安裝連接的壓力表可以配備一個安裝邊或三角凸邊及安裝支架上高質量。
Description of Vibration Resistant Pressure Gauge
The HP113.01 liquid-filled Bourdon tube pressure housing is made of stainless steel, and the wetted part is made of copper alloy.
The HP113.01 liquid-filled pressure gauge meets the requirements of international industry standards EN 837-1, ASME B40.1 & GB 1226-2017 for Bourdon tube pressure gauges.
Due to the liquid filling of the watch, the pressure elements and movements are effectively cushioned. Therefore, these meters are particularly suitable for measurements at highly dynamic load points, such as frequent pressure fluctuations or vibrations.
The HP113.01 liquid-filled pressure gauge case is available in standard sizes of 50, 63, 80 and 100 mm and is IP65 rated. The accuracy of the pressure gauge can reach 1.0 level and can be widely used in industry.
When mounted on a control panel, pressure gauges with axial mounting connections can be equipped with a mounting edge or triangular flange and mounting bracket.
