舉報評價

多功能掃描探針顯微鏡（帶納米力學測試功能）

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱 北京伯英科技有限公司
品牌
型號
所在地 北京市
廠商性質 其他
更新時間 2025/2/24 10:52:49
訪問次數 20

在線詢價收藏產品點擊查看聯系電話

索取相關資料

促銷詳情

促銷時間：

特價說明：

促銷詳細：

2020年01月08日至 2020年02月08日

特價促銷

模內澆口分離自動化先進的解決方案，降低對人的依賴度；傳統的塑膠模具開模后產品與澆口相連創造更多，需二道工序進行人工剪切分離宣講活動，模內熱切模具將澆口分離提前至開模前，消除后續工序工藝技術，有利于生產自動化效率，降低對人的依賴。

產品簡介

我也要發布產品信息

多功能掃描探針顯微鏡（帶納米力學測試功能）型號：NT-206近年來，是集多功能于一身的原子力顯微鏡講道理，帶有復雜的硬件與軟件分析系統，可分析形貌與力學性能技術先進，分辨率為納米級別

詳細信息在線詢價

多功能掃描探針顯微鏡（帶納米力學測試功能）型號：NT-206更多的合作機會，是集多功能于一身的原子力顯微鏡，帶有復雜的硬件與軟件分析系統認為，可分析形貌與力學性能服務好，分辨率為納米級別》磻芰?？商砑樱?strong>納米壓痕共謀發展、劃痕、磨損結構重塑，附著力聽得懂、摩擦力測試，納米光刻等功能高質量發展。

Positioning probe over journal neck of watch gear

A probe is positioned above journal neck of watch gear

Embedded videosystem in combination with motorized XY micropositioning stage provide convenient tuning of the instrument and its fine targeting onto the features on the sample surface. All that dramatically enhances the instrument's functionality when researching micro- and nanosize objects.

To meet requirements of specific research tasks, AFM NT-206 can include specialized changeable probe holders for microtribometry and adhesiometry or for nanoindentation.

NT-206 ::: Description ::: Features ::: Delivery set ::: Software

多功能掃描探針顯微鏡（帶納米力學測試功能）技術指標：

Measurement modes: 測量模式： Motion patterns at the measurements: - area (matrix); - line; - single point.	Contact static AFM 接觸靜態 Lateral force microscopy /with contact static AFM/ 橫向力顯微鏡/用靜態接觸AFM Non-contact dynamic AFM 非接觸式動態AFM Intermittent contact AFM (similar to Tapping Mode®) 間隙接觸（敲擊） Phase contrast imaging /with intermittent contact AFM/ 相襯成像/用間隙接觸AFM Two-pass mode (for static and dynamic AFM) 6. 兩回合模式（適合靜態與動態AFM） Two-pass mode with varying separation (for static and dynamic AFM) /Original technique!/兩回合模式全方位，伴隨變化的間距， Multicycle scanning (for static and dynamic AFM) /Original technique!/多回合掃描（適合靜態與動態AFM） Multilayer scanning with varying load (for static and dynamic AFM) /Original technique!/多回合掃描重要平臺，伴隨變化的載荷（適合靜態與動態AFM） Electrostatic force microscopy (two-pass technique) , 靜電力顯微鏡（雙回合技術） Current mode , *電流模式 Magnetic force microscopy (two-pass technique) , 磁力顯微鏡（雙回合技術） Static force spectroscopy (with calculation of quantitative parameters, surface energy and elastic modulus in the measurement point)靜態力譜（在測量點，計算定量參數共同學習、表面能與彈性模量） Dynamic force spectroscopy動態力譜 Dynamic frequency force spectroscopy /Original technique!/動態頻率力譜 Nanoindentation 納米壓痕* Nanoscratching *納米劃痕 Linear nanowear 線性納米磨損 Nanolithography (with control of load, depth and bias voltage) 納米光刻（控制力順滑地配合，深度，偏壓） Microtribometry /Original technique!/微觀摩擦力計量* Microadhesiometry /Original technique!/微觀附著力計量* Shear-force microtribometry /Original technique!/剪切力微觀摩擦力計量* Temperature-dependent measurements (under all above modes) 基于溫度的測量（適用于所以以上模塊）* Note. * - Specialized accessories or rig required*需要特殊的附件或工具 - Specialized probes required 需要特殊的探針
Scan field area:掃描面積	from 5x5 micron up to 50x40 microns
Maximum range of measured heights:高度范圍	from 2 to 4 micron
Lateral resolution (plane XY):側面分辨率	1–5 nm (depending on sample hardness)
Vertical resolution (direction Z):豎直分辨率	0.1–0.5 nm (depending on sample hardness)
Scanning matrix:掃描矩陣	Up to 1024x1024 points
Scan rate:掃描速度	40–250 points per second in X-Y plane
Nonlinearity correction :非線性校正	A software nonlinearity correction provided
Minimum scanning step:最小掃描步階	0.3 nm
Scanning scheme:掃描步驟	The sample is moved in X-Y plane (horizontal) and in Z-direction (vertical) under stationary probe.
Scanner type:掃描器類型	A piezoceramic tube.
Cantilevers (probes):懸臂（探針）	Commercial AFM cantilevers of 3.4x1.6x0.4 mm. Recommended are probes from Mikromasch or NT-MDT. Checked for operation with probes by BudgetSensor and Nanosensors
Cantilever deflection detection system:懸臂傾斜探測系統	Laser beam scheme with four-quadrant position-sensitive photodetector
Sample size:樣品尺寸	Up to 30x30x8 mm (w–d–h); extending block insert allows measurement of samples with height up to 35 mm
High voltage amplifier output: 高壓放大器輸出	+190 V
ADC:	16 bit
Operation environment:操作環境	Open air, 760+40 mm Hg col., T = 22+4°С, relative humidity <70%
Range of automated movement of measuring head:測量頭自動移動范圍	10x10 mm in XY plane for micropositioning of probe relative measured sample at step 2.5 micron with optical visual monitoring
Overall dimensions:總尺寸	Scanning unit: 185x185x290 mm Control electronic unit: 195x470x210 mm
Field of view of embedded videosystem:植入視頻系統的視場	1x0.75 mm, visualization window 640x480 pixel, frame rate up to 30 fps.
Vibration isolation:防震隔離	Additional antivibration table is recommended
Host computer:控制計算機	Not less than: Celeron^®2.2, RAM 256 MB, HDD 80 GB, VRAM 128 MB, monitor 17" 1024x768x32 bit, Windows^® XP SP1, 2 USB port. Recommended: Core i5 or equivalent, RAM 2 GB, HDD 320 GB, VRAM 1 GB, monitor 1600x1200x32 bit, Windows^® XP SP2 or higher, 2 free USB port.
Software:軟件	Special control software SurfaceScan ａnd the AFM image processing package SurfaceView / SurfaceXplorer are included.

* Before measurements, the probe can be positioned to necessary place over the sample with help of automated motorized stage. To provide monitoring for the scan area and objects below the probe, the instrument embeds a videosystem allowing to watch the probe motion over the sample surface. Videosystem and the motorized stage for the probe positioning over sample are included in base set by default. A combination of these two options allows rather flexible selection of objects to be measured on the sample surface at direct visual monitoring by the opeartor.

多功能掃描探針顯微鏡（帶納米力學測試功能）組成模塊：

DELIVERY SET

NT-206 ::: Description ::: Features ::: Delivery set ::: Software

::: BASIC SET
	Scanning unit (atomic force microscope) Includes a base platform with embedded XY positioning stage and a detachable measuring head with integrated video system
	Control electronic unit with the connetcion cables in the set (the case variants)
	Software package including: The software runs under Win32. Supplied on CD. Updates available at this site in section ARCHIVE > SOFTWAREAFM control software SurfaceScan for driving complex and data acqusition and visualization .SurfaceView and SurfaceXplorersoftware package for the measured data processing, visualization and analysis.The software can include plug-ins for processing AFM-data obtained with other microscopes.A set of drivers for connection of control electronic unit with host PC and running videosystem.
Note: ¹ Base set includes also the control software (for Win32) and user manual. 多功能掃描探針顯微鏡（帶納米力學測試功能）可選配件
::: ADDITIONAL ACCESSORIES (optional)
	A specialized antivibration rack	A changeable probe holder
	Changeable scaners for ranges: 5x5x2 um 10x10x3 um 20x20x3.5 um 40x40x3.5 um 50x50x3.5 um 90x90x3.5 um	Set for scanning the sample emmersed in liquid medium
	Thermocell: a changeable sample platform for measured sample heating up to 150 °С with stand-allone controller	A changeable holder for conducting probes
	Extending block insert allowing measurement of thick samples with height up to 35 mm	A changeable microtribometer-adhesiometer unit
	Option: a set of AFM probes (Prod. by Mikromasch)	A changeable shear-force microtribometer unit
	Option: a set of calibration test gratings (Prod. by Mikromasch)	A changeable nanoindentor unit

多功能掃描探針顯微鏡（帶納米力學測試功能）軟件

SOFTWARE

NT-206 ::: Description ::: Features ::: Delivery set ::: Software

Control software running on 19-inch screen Control software for AFM NT-206 SurfaceScan is a 32-bit Windows application.
It runs under Windows XPsp2/Vista/7 operating systems.

The control software provides all preliminary tunings and settings necessary for the AFM operation: visual control over the laser-beam detection system adjustment, tuning of the cantilever oscillations (in dynamic modes), feed-back system adjusting, sample positioning under the probe and sample approach to the probe before measurements and removal after the measurements. A full-field or any reduced area within the full field of the scanner can be selected for measurements.

Operator can watch any combination of acquired AFM/LFM images in data visualization window or switch to look at them in one window. Additionally, profile of currenly acquired line can be monitored as well.

Acquired data are saved in files of special format that can be then processed, visualised (in 2-D and 3-D presentation) and analysed with a specialized software package SurfaceView or SurfaceXplorer.