54100A系列網絡分析儀可提供設備特性的過程中。設備包括：放大器發展契機、天線、適配
器促進進步、RF電橋發力、電纜優勢領先、波相傳輸線、接收器共創美好、衰減器推動並實現、VCO、開關覆蓋範圍、耦合器優化程度、過濾
器等。*的軟硬件特性可加速生產力和提高準確性向好態勢。結合自動波段搜索功能
加快調節速度平臺建設。低源同步和高指向性SWR自動測試儀確保準確。
★快速準確的測量傳輸貢獻力量、返回?fù)p耗及精確性返回?fù)p耗使用、SWR、群延遲發行速度、功率
和距離誤差更加堅強。
★晶體源特別穩定和準確。
★內置自動化特征包括距離誤差
★內置磁盤驅動
★結實可靠的機箱
★傳輸收益（損耗）性能，群延遲和功率測量
★傳輸及返回?fù)p耗（或SWR）
★適配器初步建立、衰減器、終端供給、耦合器及RF電橋
★54107A 純量測試系統（0.001-1.5GHz）
特 點:
54100A系列網絡分析儀可提供設備特性的方法。設備包括：放大器、天線進行探討、適配
器落到實處、RF電橋、電纜最新、波相傳輸線技術創新、接收器、衰減器重要作用、VCO持續向好、開關、耦合器充足、過濾
器等進展情況。*的軟硬件特性可加速生產力和提高準確性。結合自動波段搜索功能
加快調節速度綠色化發展。低源同步和高指向性SWR自動測試儀確保準確至關重要。
★快速準確的測量傳輸、返回?fù)p耗及精確性返回?fù)p耗、SWR背景下、群延遲、功率
和距離誤差可靠保障。
★晶體源特別穩定和準確自然條件。
★內置自動化特征包括距離誤差
★內置磁盤驅動
★結實可靠的機箱
★傳輸收益（損耗），群延遲和功率測量
★傳輸及返回?fù)p耗（或SWR）
★適配器高端化、衰減器力量、終端、耦合器及RF電橋
★54107A 純量測試系統（0.001-1.5GHz）
技術指標:
Analyzer Measurement modes Transmission(dB),return loss(dB),SWR
(linearSWR),optiona group delay(ns),power(dBm)precision return loss
(dB) and optionaldistance-to-fault Dynamic range -55 to +16dBm,
autozeroing with DC detection Inputs Three,two standard inputs,A and
B,with optionathird reference channel,R(Option 5) Display channels
Two channels are used to select and simultaneouslydisplay any two
inputs fromA,B,or R.The inputs can also be displayed asratios A/R or B/R.
Scale resolution 0.1 to 10dB(m) per pision in 0.1dB steps Cursor
functions Searches for trace maximum,minimum,dB level,dBbandwidth,next
marker and active marker Averaging 2,4,8,16,32,64,128,or 256 Limit
lines Two limit ines,either single value or multilevel segmented,for
each trace.Segmented lines may be made from up to 10inpidually
editable segments.
Auto-zero Performs an AC modulation cycle and lowlevel calibration
during sweeper ratrace Save/Recall Thirteen sets of front panel set-
ups andthirteen sets of trace memory can be stored in non-volatile
instrument memory.
Trace mask A swept frequency measurement can be storedto a graticule
trace mask for visual comparison to later measurements.
Disk drive Built-in 3.5 inch,1.44MB floppy disk drive
Autosave Automatically increments the trace datafile name and reference
number during successive data storage operationsto the DOS disk
Source Frequency range 1Mhz to 110GHz,model dependent
Alternate sweep Sweep alternay between frequenc yrangesset differently
for channel 1 and channel 2 CW Provides single frequency output(both
channelsturned off) Frequency resolution Rf Model(54107A,54109A,54111A):1
0kHz,Microwavemodels:100khz Output power Maximum guaranteed levelled
output poweris model dependent.
Reverse power protection UP to 5 Watts.Limited to 1 Watt with attenuatoroption
Appli-cation function Min/Max hold Save the minimum and maximum values
of successivesweeps or the combination of the two Cursor functions
Automatic cursor seach updates the bandwidth,minimum,ormaximum levels
of the displayed trace.
Compression test automation Determines the gain compression point
overthe operating freqeuncy range of an ampliffier by successively
incrementingthe source power and measuring the amount of compression
until a preset"X"dBlimit is exceeded.
Self test Performs a self test every time power isapplied or when
SELF TEST pushbutton is pressed.If an error is detected,adiagnostic
code appears,identifying the cause and location of the error.
General Operating temperature 0°to 50℃
Power 48 to 400Hz,300VA
Mass 18kg(39lb.)
Printer Parallel printer interface is compatiblewith the Canon BJ30,
Bj200e,and most Epson FX-compatible printers.
Transit case Hard shell case with custom foam inserts,PN:760-183
EMC Meets European community requirements forCE marking
訂貨信息 Model/Order No. Name
Option 1 Options
Rack mounting with slides
Option 2 70dB RF step attenuator
Option 2A 70dB,20Ghz MW step attenuator
Option 2B 70dB,26.5GHz MW step attenuator
Option 2C 70dB,40GHz MW step attenuator
Option 2D 70dB,50GHz MW step attenuator
Option 4 75Ω source output(available to 3.0GHz)
Option 5 Add reference channel
Option 6 Add external levelling
Option 7 Internal distance-to-fault software
Option 8 Internal relative group delay software
Option 12 Add front panel cover
Option 13 Add front mounted handles
Option 16 +15V DC supply for millimeter wave source modules(availablewith
<20GHz models only)
Option 25 Maintenance manual
Option 26 Extra operation and GPIB programming manual
Option 33 Canon printer 安立54147A 標量網絡分析儀 我公司*出售 出租 維修 回收二手儀器儀表|陳秋和 安立54147A 標量網絡分析儀 我公司*出售 出租 維修 回收二手儀器儀表|陳秋和 安立54147A 標量網絡分析儀 我公司*出售 出租 維修 回收二手儀器儀表|陳秋和
