全自動磁粉探傷機
Full-automatic magnetic particle flaw detector
全自動磁粉探傷檢測流水線是主要為大批量的工件檢測而設計的，除人工觀察裂紋外大幅增加，其它動作均自動完成特性。采用固定流水式，主要由電器控制系統等特點、機械流水線傳輸系統和輸送式遠離法退磁系統等組成。電器控制部分集中安裝在電源控制柜內多種，由磁化周向電源系統將進一步、縱向磁化電源系統、電氣控制系統（包含PLC控制系統）發展成就、復合磁化系統成就、紫外線燈及暗室系統，暗室照明系統構成開展面對面；機械系統由流水線傳輸系統（由電機和輸送帶傳輸系統）系統，電極夾持系統（氣缸和磁化電極）、磁懸液噴灑進一步提升、過濾及回收系統構成空間廣闊，遠離法退磁系統由高場強退磁線圈、減速機電機系統、輸送帶傳輸系統組成增強。
The full-automatic magnetic particle inspection assembly line is mainly designed for mass inspection of workpieces, and all other actions are automatically completed except manual observation of cracks. Fixed flow type is adopted, which mainly consists of electrical control system, mechanical flow line transmission system and conveying type remote demagnetization system. The electric appliance control part is centrally installed in the power control cabinet and consists of a magnetization circumferential power supply system, a longitudinal magnetization power supply system, an electric control system (including a PLC control system), a composite magnetization system, an ultraviolet lamp, a darkroom system and a darkroom lighting system. The mechanical system consists of assembly line transmission system (composed of motor and conveyor belt transmission system), electrode clamping system (cylinder and magnetized electrode), magnetic suspension spraying, filtering and recovery system. The remote demagnetization system consists of high-field demagnetization coil, reducer motor and conveyor belt transmission system.
一次性復合磁化可檢查出工件表面和近表面因鍛造、熱處理交流等、機械加工和疲勞而引起的裂痕等細微缺陷更加廣闊，磁化噴淋后經過人工觀察有無缺陷，設備探傷完畢后提高，由于批量較大可以使用，觀察完畢后由輸送帶退磁，速度快紮實、效率高效高化。
One-time composite magnetization can check out minor defects such as cracks on the surface and near surface of the workpiece caused by forging, heat treatment, mechanical processing and fatigue. After magnetization spraying, manually observe whether there are any defects. After equipment flaw detection is completed, due to large batch size, the conveyor belt demagnetizes after observation, with high speed and efficiency.
