|
JWT-A型彈簧磁粉探傷機 適用范圍： 適用于機車車輛緩沖器彈簧、軸箱彈簧等圓柱螺旋彈簧的磁粉探傷 特點及技術指標： 1. 采用中心導體（穿棒）法和直接通電法對彈簧進行復合磁化講道理，保證螺旋彈簧簧絲表面可獲得足夠強度的較均勻的切向磁場 2. 通過調節托架升降裝置,使調整彈簧中心線與磁化裝置中心線一致，以滿足不同直徑彈簧的磁粉探傷需要 3. 磁化電流由可控硅調壓模塊控制,電流大小可根據彈簧直徑大小的不同隨時調整技術先進。以滿足不同外經彈簧的探傷要求 4. 彈簧可360°自由旋轉更多的合作機會，以便探傷操作人員觀察彈簧內外磁痕延伸。 5. 床式一體化設計，無須特殊基礎服務好，安裝維修簡便新趨勢。 6. 磁化方式：中心導體法 直接通電法 復合磁場 7. 中心導體磁化電流：0～5000A連續可調 8. 通電磁化電流：0～1000A連續可調 9. 電極間距：240～600mm可調（300～820mm可調） 10. 可檢測彈簧外徑：70～200mm（200mm～330mm） 11. 檢測靈敏度：清晰顯示A1型標準試片15/50的人工缺陷 12. 剩磁：不大于0.3mT 13. 外形尺寸：2.1m×0.8m×1.4m （3.485m×1.868m×2.05m） 14. 主機總重量：800kg JWT-A Magnetic Particle Flaw Detector for Spring Applicable scope It is suitable for locomotive and rolling stock bumper spring, axle box spring and other coil spring of magnetic particle testing Features and Technical parameters 1. For the structural characteristics of the spring adopting the center conductor (through rod) and direct current flow method to make the spring achieve composite magnetization, ensure the surface of the spring wire spring get availability of sufficient strength and more uniform tangential magnetic field 2. Through adjusting bracket lifting gear, adjusting spring centerline are consistent with the center line of the magnetizer, to meet the needs of the different diameter of the spring of magnetic particle inspection. 3. Magnetizing current controlled by thyristor voltage regulation module,It can be adjusted at any time according to the diameter of the spring. 4. The machine can drive the spring rotate in order to observe the internal and external magnetic marks, enabling semi-automatic flaw detection of the spring 5. Bed struct integration design, without special foundation, easy installation and maintenance 6. Magnetization mode: Center conductor method, Current magnetization method, Resultant magnetic field. 7. Center conductor magnetization current: 0-5000A continuously adjustable 8. Electrified magnetization current: 0-1000A continuously adjustable 9. Electrode spacing:240-600(300-820)mm Adjustable (on demand) 10. The diameter of the spring detected: 70-200mm(200-330) (on demand) 11. Detecting sensitivity: Clearly displays the artificial defect of A1 standard test piece 15／50 12. Residual Field: ≤0.3mT 13. Mainframe exterior size: 2.1×0.8×1.4(3.485×1.868×2.05)m 14. Mainframe weight: 800kg
| 
