移動式磁粉探傷機MobilemagneticparticleflawdetectorCYD-3000/5000移動式磁粉探傷機CYD-3000/5000MobileMagneticParticleDetectorCYD-3000/5000移動式磁粉探傷機雙重提升，能對被探傷制件進行交流或直流磁化和自動退磁戰略布局，能作連續法和剩磁法探傷；大尺寸制件分段局部磁化

移動式磁粉探傷機

Mobile magnetic particle flaw detector

CYD-3000/5000移動式磁粉探傷機

CYD-3000/5000 Mobile Magnetic Particle Detector

CYD-3000/5000移動式磁粉探傷機表現明顯更佳，能對被探傷制件進行交流或直流磁化和自動退磁狀態，能作連續法和剩磁法探傷；大尺寸制件分段局部磁化穩定發展。采用邏輯電路和電子時間控制電路基石之一，帶斷電相位控制器，剩磁穩定增持能力，自動退磁能從所用磁化電流逐漸衰減到零共同努力，使剩磁消失，操作方便追求卓越、效果好逐漸完善。調整可控硅導通角的大小來調整磁化、退磁電流的大小　適用于石油化工合理需求、冶金是目前主流、船舶、電力高質量、鐵路充分發揮、汽車、機械修理等行業的各類壓力容器管理、金屬結構件設計、鑄造件、鍛造件改進措施、焊接件就此掀開、熱處理件、各種零部件探傷今年。

CYD-3000/5000 mobile magnetic particle flaw detector can perform AC or DC magnetization and automatic demagnetization on the parts to be flaw detected, and can perform flaw detection by continuous method and remanence method. Segmented local magnetization of large size parts. Using logic circuit and electronic time control circuit, with power-off phase controller, remanence is stable, automatic demagnetization energy gradually attenuates from the used magnetization current to zero, making remanence disappear, easy to operate and good in effect. Adjusting the conduction angle of silicon controlled rectifier to adjust the magnetization and demagnetization current is suitable for flaw detection of various pressure vessels, metal structure parts, casting parts, forging parts, welding parts, heat treatment parts and various parts in petrochemical industry, metallurgy, ship, electric power, railway, automobile, mechanical repair and other industries.

特點及功能：

Features and functions:

● 采用交流或交直流磁化電源穩步前行，儀器配滾輪移動結構不合理，可現場使用或安放在固定位置使用；

AC or AC/DC magnetizing power supply is adopted, and the instrument is equipped with rollers to move, which can be used on site or placed in a fixed position.

● 采用交流帶斷電相位控制各有優勢，可連續法或剩磁法探傷效果較好；

Phase control with AC power cut-off can be used for flaw detection by continuous method or remanence method.

● 采用可控硅調壓，電流連續可調快速增長，過流開放以來、過壓、過溫多重保護高質量；

Thyristor voltage regulation is adopted, current is continuously adjustable, and multiple protections of overcurrent, overvoltage and overtemperature are provided.

● 采用觸頭法（支桿法）或纏繞法/線圈法探傷。

Use contact method (strut method) or winding method/coil method for flaw detection.

● 采用交流/直流全波或半波整流激發創作，符合美國ASME標準前景。

AC/DC full-wave or half-wave rectification is adopted, which conforms to American ASME standard.

● 采用衰減式自動退磁。

Attenuation type automatic demagnetization is adopted.

● 可配備A 增幅最大、E 共享應用、O、 D 等便攜式探頭標準。

Portable probes such as a, e, o, d can be equipped.