■產品特點 Features
●中文界面、支持XP/Win7/Win8簡單化;
●USB接口力度、即插即用、通訊穩定快速系統性;
●試驗數據全程記錄勇探新路、快速回放、點重啟傳遞;
●面板配置自閉環按鈕試驗,方便振動試驗故障診斷;
●全智能化參數設置提供有力支撐、專家系統支持切實把製度、簡單操作;
●TI300MHz自行開發、32位浮點雙核DSP,24位144dB AD/DA進行部署;
●2—16個輸入通道(電壓/電荷/ICP選配),1~2個輸出應用情況;
●隨機100dB動態范圍示範,12800譜線數、10kHz分析頻率有很大提升空間;
●自帶JJG運行好、GJB150.86首次、GJB150.15、810F等標準參數部署安排。
數字振動控制器
Digital Vibration Controller
VCS系列振動控制器具有全系列的振動試驗功能搖籃,能夠在電動或液壓振動臺上實現隨機、正弦掃額推廣開來、諧振搜索和駐留推動、典型沖擊、正弦加隨機資源配置、隨機加隨機信息、在寬帶隨機下實現窄帶隨機加正弦、沖擊響應譜控制大力發展、瞬態仿真豐富內涵、道路譜模擬等振動試驗‘a能提升?刂栖浖\(yùn)行在Windows7/810下適應性,界面友好,操作便捷總之;同時系統還提供完善的試驗進程管理面向、數據指示和試驗報告生成等功能支撐作用,使得測試更加方便研學體驗、可靠。
振動控制儀采用模塊設計和分布式數據處理方案最為突出,容易進行通道及試驗功能擴充落實落細。32位高速雙DSP處理結構、低噪聲電路設計技術.24A/D和D/A硬件高效化,高速USB2.0數據通訊電路組成製高點項目,采用自適應控制算法的控制軟件功能強大,將振動控制系統技術性能提高一個全新的水平範圍和領域。
VCS series vibration controller has the full range of vibration test function, which can achieve random, sinusoidal sweep, resonance search and dwell, classical shock, sinusoidal-random, random-random on electrodynamic or hydraulic vibration table, and achieve narrowband random-sinusoidal, shock response spectrum control, transient simulation, road spectrum, etc simulated vibration test under random broadband. Windows 7/8/10 control software with friendly interface and convenient operation. At the same time, the system also provides perfect testing process management, data instructions and test report generation, making the test more convenient and reliable.
Vibration control system adopts modular design and distributed data processing program to carry out the expansion of the channel and test function easily. Composed of32-bit high speed DSP processing structure, low noise circuit design technology, 24 bit A/D and D/A hardware, high-speed USB2.0 data communication circuit, the control software of the adaptive control algorithm id powerful, and improve the technical performance of vibrational control system to a new level.
■產品特點 Features
●控制精度高有所增加,動態范圍寬;
●控制性能完善更高要求,具有全系列標準測試功能估算;
●多重安全保障,有效保護振動臺和功率放大器等試驗設備的可能性;
●內置ICP恒流源和電荷放大器不要畏懼,電壓和電荷輸出型振動傳感器可直接接入系統;
●小量級信號檢查系統控制環性能問題,測試系統傳遞函數逐漸顯現;
●自動或手動生成WORD試驗報告全會精神,用戶可定制報告內容;
●實現啟動拓展基地、暫停集中展示、停機和繼續等遠程操作;
●AC單端體系流動性、AC雙端宣講手段、DC單端、DC雙端積極拓展新的領域;
●USB2.0通訊接口與PC機相連配套設備,方便快捷,即插即用;
●High control precision, wide dynamic range;
●Perfect control performance, with a full range of standard test functions;
●Multiple safety protection, effectively protect the shaker, power amplifier and other test equipment;
●Built-in ICP constant current source and charge amplifier, vibration sensor of voltage and charge output can be directly connected to the system;
●Small signal checking the performance of the system control loop and test system transfer function;
●Automatically or manually generate WORD test report. Users can self-customize report content
●Allow start pause, stop, continue, etc remote operations;
●AC single ended, AC double ended, DC single ended, DC double ended;
●USB2.0 communication port connected with PC, quick and convenient.
■技術參數 Specifications
基本型號Table model | VCSUSB-2 | VCSUSB-8 |
控制通道Control Channel | 1 | 1 |
測量通道Measure channel | 2 | 可擴展至16Can be extended to 16 bits |
輸入阻抗Input Impedance | 500kΩ | 500kΩ |
輸出阻抗Output lmpedance | 30kΩ | 30kΩ |
輸出電壓范圍Output Voltage rang | ±10V的峰值電壓Peak Voltage | ≦±5V的峰值電壓Peak Voltage |
輸入類型Input Type | AC/2CP | AC/ICP |
正弦 | 動態范圍Dynamic Rang | >90dB | >95dB |
| 控制時間Control Time | <10ms | <10ms |
| 控制精度Control Accuracy | ±1dB200自由度達到90%的可信度 |
| 頻率范圍Frequency Range | 1~4680Hz | 0.4~12000Hz |
| 掃描速率Scanning rate | 對數Logarithm | 0~100Oct/min | 0~100Oct/min |
|
| 線性Linear | 0~6000Hz/s | 0~6000Hz/s |
| 掃描方式Scan type | 對數/線性Logarithm/Linear | 對數/線性Logarithm/Linear |
隨機Random | 動態范圍Dynamic Rang | >80dB | >90dB |
| 控制精度Control Accuracy | ±1dB(200個自由度) | ±1dB(200個自由度) |
| 頻率范圍Frequency Range | 1~4680Hz | DC-11KHz |
| 譜線數Spectrum Range | 100、200尤為突出、400優勢領先、800 | 110、225逐步改善、450、900、1800 |
| 自由度Freedom | 2~1000 | 2~1000 |
經典沖擊Classic Shock | 脈沖持續時間Pulse Duration | 0.5~3000ms | 0.5~3000ms |
| 頻率范圍Frequency Range | DC-22000Hz | DC-22000Hz |
| 容差類型Tolerance Type | MIL-STD-810或用戶自定義 or user defined |
| 沖擊波形Shock Wave | 半正弦優化上下、前鋒鋸齒、三角波模樣、矩形生產體系、梯形或自定義Half sine, From peak saw tooth, Triangle, Rectangle or user-defined |
| 楨長度Frame Length | 128~16384 |
| 平均次數Average Times | 1~200 |
| 補償方法Compensation Method | 前后脈沖補償,前脈沖補償很重要,后脈沖補償Front and back compensation, Front pulse compensation, Back pulse compensation |
| 諧振搜尋與駐留Resonant search and dwell | 正弦加隨機Sine and Random |
| 其他Others |
| 隨機加隨機Random and Random |
|
|
| 正弦加隨機加隨機Sin and Random and Random |
|
|
| 沖擊響應譜(SPS)控制(SPS) control |
|
|
| 路普仿真Loop Simulation |
|
|
| 諧振搜尋與駐留Resonant search and dwell |
運行平臺Operating Platform | Windows 2000/XP |
*可選擇另外的控制器Other controllers option