美國 CANNON 產(chǎn)品
黏度計校正用標準液/標準黏度液 (Viscosity standards)
低溫的標準黏度液 (Low-Temperature Viscosity)
Viscosity standars for calibration of viscometers at sub ambient temperatures.
低溫的標準粘度液 (Low-Temperature Viscosity)
Table 6 • Nominal Viscosity Values of General Purpose Low Temperature Viscosity Standards
†Density values provided at all test temperatures.
Catalog Number
|
Viscosity Standard | Approximate Viscosity in mm2/s (cSt) /mPa·s (cP) except where noted |
–55 °C/ –67 °F | –40 °C/ –40 °F | –34 °C/ –30 °F | –29 °C/ –20 °F | –26 °C/ –15 °F | –25 °C/ –13 °F | –23 °C/ –10 °F | –20 °C/ –4 °F | –18 °C/ 0 °F | –12 °C/ 10 °F | –10 °C/ 14 °F | –7 °C/ 20 °F | 0 °C/ 32 °F |
9727-G10 | N27B† | — | 24,000/ 20,000 | 12,000/ 10,000 | 6,100/ 5,200 | 4,500/ 4,000 | — | 3,500/ 3,000 | — | 2,000/ 1,700 | — | — | — | — |
9727-G12 | N27C† | — | 45,000/ 40,000 | 22,000/ 20,000 | 12,000/ 10,000 | 8,000/ 7,000 | — | 6,100/ 5,000 | — | 3,500/ 3,000 | — | — | — | — |
9727-G15 | N115B† | — | — | — | 160,000/ 140,000 | 110,000/ 95,000 | — | 75,000/ 65,000 | — | 37,000/ 30,000 | 20,000/ 17,000 | — | 12,000/ 9,500 | — |
9727-G25 | N60B† | 150,000 mPa·s (cP) | — | — | — | — | — | — | — | — | — | — | — | — |
9727-G30 | N120B† | — | 150,000 mPa·s (cP) | — | — | — | — | — | — | — | — | — | — | — |
9727-G35 | N480B† | — | — | — | — | 150,000 mPa·s (cP) | — | — | — | — | — | — | — | — |
9727-G40 | N1400B† | — | — | — | — | — | — | — | — | — | 150,000 mPa·s (cP) | — | — | — |
9727-G45 |
N2B | — | — | — | — | — | — | — | 8 mm2/s (cSt) jet fuel standard | — | — | — | — | — |
9727-G50 | N74B | — | — | — | — | — | — | — | — | — | — | — | — | 3,400 mPa·s (cP) |
9727-G55 | N38B† | — | — | — | — | — | — | — | — | — | — | 4,200 mPa·s (cP) | — | — |
9727-G60 | N25B† | — | — | — | — | — | 8,000 mPa·s (cP) | — | — | — | — | — | — | — |
9727-G65 | N14B† | — | 17,000 mPa·s (cP) | — | — | — | — | — | — | — | — | — | — | — |
CANNON Low Temperature Viscosity Standards
ASTM D2983, SAE J300
Low Temperature Viscosity Standards (General Purpose, CCS and CMRV)
CANNON Low Temperature Viscosity Standards verify viscometer performance at subzero temperatures. These standards are applicable to SAE Specification J300 as well as a variety of ASTM Methods including:
• ASTM D2983, Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
• ASTM D3829, Predicting the Borderline Pumping Temperature of Engine Oil
• ASTM D4684, Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
• ASTM D6821, Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
• ASTM D6896, Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
• ASTM D5293, Apparent Viscosity of Engine Oils and Base Stocks Between –5 °C and –35 °C Using Cold-Cranking Simulator
The General Purpose Low Temperature Viscosity Standards in Table 6 are applicable to a variety of applications such as testing the viscosity of gear oils (SAE 70W, 75W, 80W and 85W) and automatic transmission fluids (ATF) per ASTM D2983 and SAE J300 with CANNON’s Thermoelectric Sample Conditioner System (TESC). Lot specific viscosity data is provided with each standard. Nominal viscosity values are n in Table 6.
Table 6 • Nominal Viscosity Values of General Purpose Low Temperature Viscosity Standards
†Density values provided at all test temperatures.
