| | DIS-IPS |
Specification | DIS-IPS20C | DIS-IPS5C |
Measuring range | 0.20～20 N?m
2.0～200 kgf?cm
2.0～180 lbf?in | 0.020～5 N?m
0.20～50 kgf?cm
0.20～45 lbf?in |
Accuracy | ±0.5% （499 or less digit±3digit） |
Display | The 4 figures digital display of LCD |
The measurement direction | CW-CCW （rightleft） |
Measuring
mode | P-P Peak | Peak load value hold. |
T-R Track | Indication of real time torque value. |
P-D Peak down | Holding Load Value at the moment to change from upward to downword. |
C Real-time output | Load torque value is outputted every about1/ 180 second . |
Decision
function | Setting of torque value | A maximuma minimum value are in a measuring range,a setup is possible.
Can confirm the set value by the buzzer sound or LED. |
Automatic Clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance |
One-touch-Zero Clearance | Easy Zero-Adjustment with pressing CLEAR button |
The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. |
Data spec. | Data transfer | ASCII format （Baud rate : 19200） |
Data memory | 800 data stored |
Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh |
Auto power save | 10 minutes no use, automatically switch off. |
Charging time | From empty - about 3hours |
Continunous working time | 12 hours |
Attachment fit mouth | □20ｍm |
Meter outside type dimension | 100（W）×105（D）×33（Ｈ） |
Weight | Meter part 520g |
Attachment | Fixed Attachment □20㎜ M4/M5/M6/M8 |
OW joint OW-20 | OW joint OW-10 |
Accessories
（one piece each） | AC/DC adaptor （Please choose AC adaptor out of 120V,230V.） |
An inspection report, a proofreading certificate, a traceability system figure |
